MaxxPro XL Mine Protected Vehicle (MPV) Specifications
The following tables refer to both the MaxxPro and MaxxPro XL MRAP vehicles:
| Length | 240" to 264" |
| Width | 99" |
| Height | 115" |
| Wheel Base | 153" to 176" |
| Ground Clearance (Center of Vehicle) | 16.5" |
| Ground Clearance (Differential Clearance) | 14.4" |
| Angle of Approach | 58° |
| Angle of Departure | 46° to 48° |
| Gradeability | 70% low range |
| Side Slope | 30% |
| Mass Tare (GVM) | 27,850 to 29,850 lbs. |
| Payload | 3,650 to 11,150 lbs. |
| GVWR | 31,500 to 39,000 lbs. |
| Seating | 2-man crew plus 4 to 10 passengers |
| Configuration | 4x4 |
| Turning Circle | 50' to 58' |
| Make | International® I6 Diesel |
| Type | Turbo inter-cooled, direct electronic injection, four stroke |
| Displacement | 8.7 L (530 ci) |
| Emission Standard | EPA 2005 |
| Maximum Power | 330 hp @ 2,100 rpm |
| Power/Mass Ratio | 18.9 to 20 hp/US ton |
| Maximum Torque | 1,150 ft.-lbs. @ 2,100 rpm |
| Batteries | 2 x 12-volt Batteries |
| Alternator | 400 amps |
| Lighting | Service headlamps and Blackout lights |
| Electrical System | Diamond Logic® |
| Transmission | Allison 3000 5-Speed Automatic |
| Transfer Case | 4 x 4 Two-Speed |
| Steering Type | Hydraulically assisted recirculating ball |
| Front Axle | 16,000 lbs to 21,000 lbs Drive/Steer |
| Rear Axle | 21,000 lbs to 30,000 lbs Drive |
| Springs | Semi-elliptical leaf springs |
| Shock Absorbers | Double acting telescopic hydraulic |
| Service Brakes | Full air brakes with ABS and traction control |
| Parking Brakes | Air-activated, hand-operated, rear axle brakes |
| Fording Depth | 36" Without Preparation |
| Wheels and tires | Rims: 10" x 20" Tires: 395/85R20 |
| Run Flats | Optional |
MaxxPro XL Mine Protected Vehicle (MPV). Photo courtesy International Military and Government LLC.
MaxxPro XL Mine Protected Vehicle (MPV). Photo courtesy International Military and Government LLC.
